MM-050-H – Heater for drying processes 50 kW

Inicio > Productos > Industrial heating > MM- H / W / CP - Industrial drying processes > MM-050-H – Heater for drying processes 50 kW

Technical data

Hot air heater for drying processes with a heating power of 50 kW and an air flow of 4.500 m3/h with a thermal jump of 30 ºC

 

  • Model: MM-050-H
  • Type of fuel: diesel, natural gas or propane gas
  • Nominal power: 50 kW
  • Thermal performance: 90%
  • Air flow: 4,500 m3 / h
  • Available pressure: 170 Pa
  • Fan motor power: 0.75 kW
  • Electrical voltage: 230V/I/50Hz
  • Dimensions (Width/Depth/Height): 795/1375/650mm
  • Drive section: 695x500mm
  • Smoke output: 120mm
  • Weight: 165 kg

Main features


Ideal equipment for all types of drying processes in the food or industrial sector.
 

  • Compact and robust equipment
  • Tubular heat exchanger with thermal efficiency higher than 90%
  • Outer finish in oven-dried polyester paint
  • Thermal insulation with air chamber and / or fiberglass
  • Centrifugal fan with built-in motor.
  • Electrical control and protection panel.
  • Thermostats of activation and stop of the burner and fan.
  • Safety thermostat.
  • Possibility of supply in horizontal or vertical.

Files

¿Necesitas más información?

Rellena el siguiente formulario con tus datos de contacto. Nuestro equipo se encargará de resolver todas tus dudas.

¿Eres un profesional?

Consulta tus condiciones en el teléfono +34 93 851 15 99

Dudas o Stock

Llámanos o envía un whatsapp al 616 48 95 30



    0
    CARRITO
    • No products in the cart.