Met Mann - You Tube Met Mann - Facebook Met Mann - Twitter

Adiabatic module to 2100-8000 m3/h - ADIABATIC COOOL PREMIUM

Adiabatic module to 2100-8000 m3/h - ADIABATIC COOOL PREMIUM

Adiabatic module to 2100-8000 m3/h - ADIABATIC COOOL PREMIUM

Ref.: ADIABATIC COOL PREMIUM

 
The adiabatic modules allow to cool and provide moisture to the air that passes through it and can be applied in air conditioners to perform a precooling or in any type of installation where it is necessary to cool and provide moisture to an air flow.
 
The flow rates allowed for use are 2.100 m3/h up to 8.000 m3/h but, on request we can manufacture modules with greater capacity.
 
Its operation is totally ecological when not using any type of refrigerant gas because the cooling of the air is effected when passing the outside air by a panel moistened with water that cools the air and increases the humidity of the same, its electrical consumption is also an 80 % Lower than other conventional air conditioning systems.
 
Instalation and maintenance:
The installation of the cooling modules consists of a single-phase electrical connection for the water pump, and a mains water outlet.
 
Maintenance consists of an annual review of the cooling panels and a general cleaning of the equipment.
 
Characteristics:
- Water tray made of AISI 316 stainless steel.
- End posts made of AISI-304 stainless steel.
- High efficiency chiller panels.
- External rotor water pump.
- Base base with legs for easy transport and installation.
- Automatic casting system patented by MET MANN.
- Continuous drainage to avoid the concentration of mineral salts.
- Hydraulic and electrical installation connected at the factory.
- On request can be supplied equipment with greater air flow, totally stainless, etc.
 
Air Flows Permitted:
The ADIABATIC COOL PREMIUM chiller modules allow the treatment of an air flow of 2,100 to 8,000 m3 / h according to the selected model.
 
Constructive details

 
 
 
 
 
 
 
 
 
 
 
 
 
High performance cooler and humidifier panel
 
 
 
 
 
 
 
 
 
 
Automatic drain system
 
 
Download our general catalog in pdf in this link:
More information on Tel. (+34) 93 851 15 99

Download PDF Catalog Request information

Models of Adiabatic module to 2100-8000 m3/h - ADIABATIC COOOL PREMIUM

Contact
  • I have read and I agree to the terms of legal notice *

 Return
Your confort and satisfaction
Metalúrgica Manlleuense S.A.
C/Fontcuberta, 32-36 Políg ind. LA COROMINA | 08560 Manlleu - Barcelona
Service customer
Phone: 93 851 15 99 | Fax: 93 851 16 45 | metmann@metmann.com
Met Mann