K - Hot air air heaters with gas operation from 23 to 34 kW

Inicio > Products > Industrial heating > K - Hot air air heaters with gas operation from 23 to 34 kW


Caudal de aire


1.700 to 3.000 m3/h
Caudal de aire


23 to 34 kW
Caudal de aire

Heating capacity

495 to 840 m3
Caudal de aire

Available fuels

Natural or propane gas

Downloadable documentation

K gas hot air fan heaters are units that work completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs.

Its operation can be methane gas or propane gas and its operation is based on heating the air sucked in by the fans and driving the hot air inside the enclosure to be heated.

The main advantages over other heating systems are:


  • They do not take up floor space.
  • Reduction of acquisition and installation costs.
  • Very fast heating system.
  • The diffusion of the air can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed.
  • Combustion efficiency greater than 90%.


Industrial premises, gyms, warehouses, greenhouses, farms, drying processes, etc.

Equipment installed in a gym



  • Completely compact and robust equipment.
  • Tubular heat exchanger with an efficiency greater than 90%.
  • Exterior finish in oven-dried polyester paint.
  • Thermal insulation by air chamber and/or fiberglass.
  • Sealed combustion with smoke extraction regardless of air intake.
  • Atmospheric gas burner for natural gas or propane gas.
  • Supplied with axial or centrifugal fan.
  • ON/OFF remote control panel with built-in room thermostat.
  • Front air outlet with air diffusion grill or to be connected to a duct network.


Showing all 4 results

¿Necesitas más información?

Rellena el siguiente formulario con tus datos de contacto. Nuestro equipo se encargará de resolver todas tus dudas.

    • No products in the cart.