Español English Português Français Deutsch Català Italiano

News

Industrial heating with air destratification │ MET MANN

08/11/2021

Heating industrial premises can be a complicated task to carry out and normally the main question is to treat work areas or to heat the entire volume of the premises.

Industrial volumetric heating with high induction cones or air destratification

Heating industrial premises can be a complicated task to carry out and usually the main question is to deal with work areas or give heat to the entire volume of the premises.
Zone heating is usually carried out when the surface to be heated is large and it is decided to heat strategic areas, but it can be said that volumetric heating is totally viable if a correct selection of the necessary power and correct air diffusion is made.

Volumetric heating is based on giving heat to the entire volume of the warehouse in combination with ceiling fans that are responsible for lowering the stratified hot air on the ceiling, with this solution, energy savings of up to 25% are achieved.

Another equally valid option is the correct dimensioning of a network of ducts with air diffusion with high induction cones, this type of diffusion allows air to be driven at high speed covering large surfaces.

In this post, you can see the installation of a 390 kW hot air generator.

Air diffusion is completed with a network of ducts and air diffusion cones.

With this solution, it is possible to heat the entire volume of the room with minimal temperature variations, thus avoiding the unpleasant thermal sensation that occurs in zone heating systems, where there are significant temperature variations on the surface of the room.