Met Mann - You Tube Met Mann - Facebook Met Mann - Twitter

Axial industrial evaporative air coolers from 16,000 to 30,000 m3/h - ECO COOLER

Axial industrial evaporative air coolers from 16,000 to 30,000 m3/h - ECO COOLER

Axial industrial evaporative air coolers from 16,000 to 30,000 m3/h - ECO COOLER


Industrial evaporative air conditioners with axial fan for the air conditioning of premises from 200m2 to 375m2

ECO COOLER evaporative air coolers are a natural cooling system that provide fresh and moist air in the room to be heated.

To cool the air, evaporative cooling technology is used, which consists in passing the outside air through panels moistened with water, as the air passes through this area it cools and increases its humidity. The treated air is driven by a fan inside the premises and based on the renewal of the indoor air comfort temperature is reached.

The necessary electrical power is 80% lower than the traditional air conditioning system and using water as a cooling element prevents the emission of harmful gases into the environment.
ECO COOLER evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow rate at all times, it also has an electronic board that is responsible for performing all the functions of the equipment.
The control of the equipment can be done through a wall control panel or with remote control.


Instalation and maintenance:

The installation of evaporative air conditioners consists of a single-phase or three-phase electrical connection according to the selected model, a network water connection, support bench and air diffuser elements.

Its maintenance consists in carrying out an annual review of the cooling panels and a general cleaning of the equipment. 


- Plastic structure resistant to ultraviolet rays and temperatures from -41║C to + 96║C.
- Operating mode: Cooling - Ventilation - Extraction
- MANUAL or AUTO operation with time programming.
- Multifunction remote control with room temperature and humidity control.
- Pre cooling of the panels before starting the fan.
- Water inlet solenoid valve with opening and closing with mechanical buoy.
- Water level control for pump protection.
- Self cleaning for water renewal.
- Emptying when stopping the equipment and cleaning for the renewal of the water when the evaporative works in manual mode, to avoid the formation of micro organisms and concentration of mineral salts.


ECO COOLER evaporative coolers provide an air flow rate of 16,000 to 30,000 m3/h depending on the model selected.

Posiciones de impulsiˇn de aire:

Depending on the model selected, the treated air may be lower, lateral or higher.

Constructive details

Structure of compact and resistant plastic material


Cooler panel with insect filter


Homogeneous water distributor applied to the ceiling




Water pump, automatic emptying and level sensor



Axial fan with internal temperature sensor


Multifunction display and remote control


Electrical panel to control up to 28 devices (accessory)


More information at Tel. (+34) 93 851 15 99

Download PDF Catalog Download Manual PDF Request information

Models of Axial industrial evaporative air coolers from 16,000 to 30,000 m3/h - ECO COOLER

  • I have read and I agree to the terms of Privacy Policy *

Your confort and satisfaction
Metal˙rgica Manlleuense S.A.
C/Fontcuberta, 32-36 PolÝg ind. LA COROMINA | 08560 Manlleu - Barcelona


Service customer
Phone: 93 851 15 99 | Fax: 93 851 16 45 |
Met Mann