Cabins to increase the air temperature - TEC

Ref.: TEC

Cabins to increase the air temperature from 43 to 145 kW - TEC

Our modules to increase the air temperature incorporate a combustion chamber and heat exchanger with high thermal performance, it has an insulated exterior paneling and a temperature control panel to order the start and stop of the burner and the fan.

Our modules to increase the temperature are designed to be applied in drying process facilities where it is required to increase the temperature of the air driven by an external air fan.

Depending on the air flow, the thermal increase can range from 20ºC to 60ºC.

The air flow treated by the equipment can range from 2,150 m3/h to 18,000 m3/h depending on the selected model.

The fuel used by the burner can be diesel, natural gas or propane gas.

Module to increase the temperature in a pressurized cabin

Basic installation diagram

1) Smoke outlet
2) Air fan
3) Air extraction system
4) Module to increase the temperature
5) Drying cabin
6) Temperature regulation thermostat

Main features:

- Completely compact and robust equipment.
- Tubular exchanger with a performance greater than 90%.
- Exterior finish in oven-dried polyester paint.
- Thermal insulation by means of an air chamber and / or fiberglass.
- Internal deflectors to direct the air to the heat exchange areas.
- Control thermostats (burner, fan, safety).
- Side air outlet on the right or left hand depending on the installation needs.