Español English Português Français Deutsch Català Italiano

Industrial drying processes - H / W / CP

Ref.: H/W/CP

Industrial drying processes, post-harvest treatment of fruits and vegetables, paint booths

Our hot air generators for industrial drying processes can run on diesel or gas and develop a heating power of 50 to 390 kW.

The hot air supplied to the drying process has a thermal jump from 18 ° C to 30 ° C and a large supply of air for rapid drying without altering the physical properties of the product.

For other types of drying where a higher temperature is required, we can carry out a specific study.

The range is made up of different models with thermal jumps, flow rates and air pressures suitable for any type of drying.

MM-H Thermal jump from 28-30 °C with available air pressure from 150 Pa.
MM-W Thermal jump from 28-30 °C with available air pressure from 150 Pa.
CP Thermal jump from 18-20 °C and available air pressure from 200 Pa.

Process in fruit drying tunnels

Main features:

- Completely compact and robust equipment.
- Tubular exchanger with a performance greater than 90%.
- Exterior finish in oven-dried polyester paint.
- Thermal insulation by means of an air chamber and / or fiberglass.
- Centrifugal fan group with one or two turbines depending on the model.
- Electrical control and protection panel according to European standards.
- Air outlet to the left or right side according to the needs of the installation.
- Possibility of manufacturing custom equipment according to technical specifications (air flow, pressure, thermal jump, ATEX motors, etc.).